To Next Page

To Previous Page

Overview 1–3

Compatibility

SCANport Products

Remote I/O modules are compatible with many SCANport products,

including the following:

If you intend to use datalinks to communicate with and control your

SCANport product, verify that your SCANport product supports

datalinks before enabling them in the module.

Controllers

This Remote I/O communications module is compatible with many

programmable controllers, including the following:

• Logix5550

• PLC-2/30

with SD2 (module version 1.02 or later)

• PLC-3

• PLC Classic Family, including the PLC-5/10 (only with 1771-SN

in Discrete Mode), PLC-5/15

™

, PLC-5/25

™

family

• PLC Enhanced family, including the PLC-5/20

™

, PLC-5/30,

PLC-5/40

™

, PLC-5/40L

™

, PLC-5/60

™

PLC-5/60L

™

family, PLC-5/80

™

• PLC-5/250

™

• PLC scanner modules and subscanners

• SLC 500

™

with 1747-SN scanner

Product

Number of

Peripherals

Supported

I/O Words Module Use

Minimum Maximum

➂

1203-GD1 or

1203-GK1 1336-GM1

1305 AC MICRO Drive

➀

508YesNo

1336 IMPACT™ Drive 6

➁

08YesYes

➃

1336 PLUS AC Drive 6

➁

08YesYes

➃

1336 PLUS II Drive 6

➁

08YesYes

1336 FORCE™ Drive 6

➁

08YesYes

➃

1336 REGEN Line Regeneration Package 2 0 2

➄

Ye s N o

1336 SPIDER Drive 6

➁

08YesYes

1394 AC Mult-Axis Motion Control System508YesNo

SMC Dialog Plus™ 102

➄

Ye s N o

SMP-3 Smart Motor Protector 2 0 2

➄

Ye s N o

1397 Digital DC Drive 508YesNo

1557 Medium Voltage Drive 508YesNo

2364F Regenerative DC Bus Supply Unit 608YesNo

➀

The Remote I/O modules are compatible with 1305 drives using firmware release 2.xx or greater.

➁

Lower horsepower products may not support a sixth peripheral. To connect multiple peripherals to a SCANport product, a port expander may be required. Refer to

the product user manual to verify that it supports a sixth peripheral.

➂

Many SCANport products support 10 words of I/O (Command/Logic, Speed Reference, and four datalinks). Remote I/O, however, supports only 8 words of I/O.

➃

Drive must be B-frame or larger. If it is a 1336 FORCE drive, it must use a standard adapter board.

➄

Datalinks are not supported by this product.

Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com