Allen-Bradley 1305 Series User Manual

Start-Up
4-10
❏ 18. Check for proper operation.
or
Slowly Increase Speed
or
a.) Start the drive.
b.) Slowly increase the speed. Check for proper motor operation throughout
the speed range.
c.) Press the Stop key.
At Speed
+5.00 Hz
Stopped
+0.00 Hz
At Speed
+60.00 Hz
❏ 19. This completes the basic start-up procedure. Depending on your
application, further parameter programming may be required. Refer to
Chapter 5 for information.
Important: The parameters in the Set Up Group (page 5-8) should be
reviewed and reprogrammed as necessary for basic operation.
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive

Allen-Bradley 1305 Series Specifications

General

Series	1305
Dimensions	Varies by model
Weight	Varies by model
Frequency Range	50-60 Hz
Control Method	Volts per Hertz
Communication Interface	RS-485
Enclosure Type	IP20
Storage Temperature	-40-70°C
Humidity	5 to 95% non-condensing