Allen-Bradley 1734 User Manual

102 Rockwell Automation Publication 1734-UM018D-EN-E - September 2017
Appendix B Adapter Web Dialogs
Use the Identity Page
To use the Identity page to make entries for the host name, module description,
module location, and chassis size, use this procedure.
1. Click Identity from the tab at the top of the page or panel on the left.
The Identity page opens
2. From the Identity page, complete entries for the following, noting that the
description and location help you identify where modules are in the
facility:
• Host Name – the name a Domain Name Server uses to resolve this
adapter’s IP address
• Module Description
• Module Location
• Chassis Size - the value that shows the number of I/O modules plus the
adapter. This value must match the number of I/O modules plus 1 for
the adapter before any I/O connections are allowed.
3. Click Apply Changes to save the modified values.

Allen-Bradley 1734 Specifications

General

Product Type	POINT I/O Adapter
Mounting	DIN Rail
Communication	EtherNet/IP
Operating Voltage	24V DC
Operating Temperature	-20°C to 55°C
Relative Humidity	5% to 95% (non-condensing)
Housing Material	Plastic