Rockwell Automation Publication 1734-UM018D-EN-E - September 2017 39
Configure the Adapter for Direct Connection in RSLogix 5000 or Logix Designer Software Chapter 4
3. Select your adapter from the list and click Create.
The New Module dialog opens.
4. Select the General Tab and enter the module details, noting that we used
the following values.
5. Click Change...
The Module Definition dialog opens.
Name POINT IO Adapter
IP Address 10.88.70.2
Note that the slot field is disabled because the slot is automatically 0
for the 1734-AENT/B adapter.
To Next Page
Loading...
