Rockwell Automation Publication MOTION-UM003K-EN-P - January 2019 119
Configure Integrated Motion Using a PowerFlex 755 Drive Chapter 5
Specify the Motor Data
Source
The Motor Data Source is where you tell the axis where the motor
configuration values are originating. You can select a motor from the database,
nameplate, or nonvolatile memory.
Choose Catalog Number as the Motor Data Source
Follow these steps to identify the specification information that is originating
from the Motion Database.
1. If the Axis Properties dialog box is not open, double-click the axis.
2. Click the Motor tab of the Axis Properties dialog box.
3. From the Data Source pull-down menu, choose Catalog Number.
4. Click Catalog Number.
5. Click Change Catalog.
6. Select a motor and click OK.
The Motor dialog box is populated with all information that is related to
the motor you selected from the Motion Database.
To Next Page
Loading...
Need help?
General
