Rockwell Automation Publication 1783-UM010C-EN-P - June 2019 47
Configure the Security Appliance Chapter 3
15. Enable Auto Update for ASA, if needed and click Next.
16. On the Startup Wizard Summary, click Finish.
The ‘Management IP Address’ listed in the ‘Configuration Summary’ is
NOT the Management IP address in the Management network. This
Management IP Address is the IP address of the network that you want
to monitor.
The wizard displays a wait message for a couple minutes.
17. Enable Smart Call, if desired and click Next.
Stratix 5950 ASDM 7.6(2) for ASA - 169.226.0.2 - Startup Wizard
Stratix 5950 ASDM 7.6(2) for ASA - 169.226.0.2 - Startup Wizard
To Next Page
Loading...