48 Rockwell Automation Publication 1783-UM010C-EN-P - June 2019
Chapter 3 Configure the Security Appliance
18. Review your setup information. If you must change something, click
Back and modify your settings.
19. When you are satisfied with the settings, click Finish.
An error window can pop up.
20. Click Close to ignore it.
21. The wizard displays a message to wait while ASDM is loading the
current configuration from your device.
22. Wait until loading is complete.
23. Eventually, the wizard displays the message, ‘Network related
configurations in the Startup Wizard have been modified.’1
24. Click OK.
The ASDM software closes.
Stratix 5950 ASDM 7.6(2) for ASA - 169.226.0.2 - Startup Wizard
10.51.72.223
169.226.0.2
168.100.1.2
192.223.1.1
168.222.1.2
To Next Page
Loading...