Alliance Laundry Systems CA050L - Burners Not Burning Properly - Gas Models

24 70422101
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting
12.Burners Not Burning Properly — Gas Models
Burners not
burning
properly - Gas
Models
Are burner air
shutters incorrectly
adjusted?
Refer to
Adjustments
Section for
proper flame
adjustment.
Is there dirt
in burners?
Disassemble
burners and
blow out the
dirt.
Is gas pressure too
high or too low?
Check serial
plate on back
of the tumbler
for correct gas
pressure.
Are orifices incorrect?
Tumbler is equipped for
type of gas specified on
serial plate at 0-2,000
feet altitude. Refer to
Installation Manual.
Is make-up air
inadequate?
Refer to
Installation
Manual for proper
make-up air
requirements.
Is exhaust duct
restricted or blocked?
Disassemble and
clean exhaust
system.
TMB1884S
Ye s
No
Ye s
No
Ye s
No
Ye s
No
Ye s
No
Ye s
TMB1884S