16.Door Open Light and Display Flash With Door Closed
Door open light and
display flash with door
closed
Is door switch
faulty?
Replace door
switch.
Is lint panel
switch faulty?
Replace lint
panel switch.
Is electrical service
connected incorrectly?
Check service connections to
terminal block in junction box.
For 120 or 240 Volt tumblers,
neutral wire must be
connected to terminal marked
“NEUT”. On single phase
tumblers, hot wire must be
connected to terminal marked
“L1”. A ground wire must be
secured to the ground screw in
the junction box.
TMB2265S
Yes
No
Yes
No
Yes
To Next Page
Loading...
