42 M413438
Section 5 Service Procedures
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the tumbler before servicing.
• Close gas shut-off valve to gas tumbler before servicing.
• Close steam valve to steam tumbler before servicing.
• Never start the tumbler with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the tumbler is properly grounded.
W002
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
IMPORTANT: Do not kink sensing tube when
installing thermostat.
NOTE: Refer to wiring diagram when rewiring
thermostat.
Figure 14
JUNCTION BOX
WIRE
TIES
THERMOSTAT
SENSING TUBE
WIRE
WAY
T013SE2A
Figure 15
WARNING
THERMOSTAT
SENSING PROBE
T014SE1A
THERMOSTAT
SENSING TUBE
LINT
SCREEN
SENSING
PROBE
LOCKING
TABS
To Next Page
Loading...
