Alliance Laundry Systems DCB30CG - Page 53

M413438 55
Section 5 Service Procedures
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the tumbler before servicing.
• Close gas shut-off valve to gas tumbler before servicing.
• Close steam valve to steam tumbler before servicing.
• Never start the tumbler with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the tumbler is properly grounded.
W002
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 28
AIRFLOW
SWITCH
CONDUIT
NUT
PHILLIPS
HEAD
SCREWS
STOVE
HIGH LIMIT
THERMOSTAT
CABINET
HIGH LIMIT
THERMOSTAT
OLDER MODELS
T024SE1A
JUNCTION
BOX
CONDUIT
NUT
PHILLIPS
HEAD
SCREWS
STOVE
HIGH LIMIT
THERMOSTAT
NEWER MODELS
T025SE1A