Allied Telesis AT-9000/28SP User Manual

Chapter : System Monitoring Commands
1442
SHOW SYSTEM SERIALNUMBER
Syntax
show system serialnumber
Parameters
None
Modes
User Exec mode and Privileged Exec mode
Description
Use this command to display the serial number of the switch. The serial
number is also displayed with “SHOW SYSTEM” on page 161.
Example
This example displays the serial number of the switch:
awplus# show system serialnumber

Allied Telesis AT-9000/28SP Specifications

General

Number of Ports	28
Port Type	Gigabit Ethernet
Ports	24 x 10/100/1000Base-T, 4 x SFP
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Power over Ethernet (PoE)	No
Rack Mountable	Yes
Product Type	Switch
Layer	3
MAC Address Table Size	16K
VLANs	4K
Jumbo Frames	9K
Dimensions (W x D x H)	440 x 240 x 44 mm
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)