Chapter 44: RSTP Commands
650
NO SPANNING-TREE ERRDISABLE-TIMEOUT ENABLE
Syntax
no spanning-tree errdisable-timeout enable
Parameters
None
Mode
Global Configuration mode
Description
Use this command to deactivate the timer for the RSTP BPDU guard
feature. When the timer is deactivated, ports that the feature disables
because they receive BPDU packets remain disabled until you manually
activate them again with the NO SHUTDOWN command.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 158
Example
This example deactivates the time for the RSTP BPDU guard feature:
awplus> enable
awplus# configure terminal
awplus(config)# no spanning-tree errdisable-timeout enable
To Next Page
Loading...
