Need help?Do you have a question about the ALLO NANO PBX and is the answer not in the manual?
Illustrates the typical interconnection diagram for NanoPBX setup.
Details the technical specifications of the NanoPBX, including features and capacity.
Lists the physical hardware specifications of the NanoPBX, including ports and dimensions.
Step-by-step guide for the physical installation of the NanoPBX hardware.
Instructions on how to access the NanoPBX's web-based graphical user interface.
Defines extensions and introduces IP and Analog types for the NanoPBX.
Guides on creating IP extensions, including required information and options.
Details creating Analog extensions using FXS ports and phone lines.
Explains how to modify or remove existing IP and Analog extensions.
Describes how to upload pre-recorded audio files for IVR or Music on Hold.
Provides instructions on recording custom voice files directly using the NanoPBX.
Explains configuring keypress actions for voice files within IVR systems.
Details setting up music files to play when callers are placed on hold.
Guides on creating IVR systems by defining action sequences and responses.
Explains scheduling IVRs to play based on specific day and time ranges.
Details integrating VoIP and PSTN lines for bridging call functionality.
Describes setting up call queues, including type, members, and retry times.
Explains creating voicemail groups to distribute messages to multiple recipients.
Details accessing, retrieving, and managing voicemail messages.
Covers general system settings like password, prefixes, and time configuration.
Explains Direct Inward Dial (DID) routing for incoming calls without attendant.
Details configuring VoIP accounts with SIP credentials and dial settings.
Covers the configuration settings for the Public Switched Telephone Network (PSTN) line.
Describes setting up DialOut rules for managing outgoing calls via PSTN or VoIP.
Details internet settings for NanoPBX, including DHCP and IP address.
Explains network settings for using NanoPBX as a router.
Allows creating and restoring system configuration backups.
Explains how to reset the NanoPBX to its factory default settings.
Covers advanced options like STUN server, NAT traversal, and RTP range.
Details hardware profiles for FXS/FXO ports, affecting impedance and ringing.
Explains connecting two NanoPBX units to double capacity.
Explains downloading Call Detail Records (CDR) in CSV format.
Details clearing all Call Detail Records from the system.
Describes filtering CDR data by date for custom searches.
Guides on performing an attended call transfer, informing the recipient first.
Explains how to perform a blind call transfer without consultation.
Details how to set up and manage three-way conference calls.
Describes how to divert incoming calls to other numbers when unavailable.
Covers call parking, hold, retrieve, and BLF support features.
Instructions on performing a hard reset to restore factory settings.
Provides guidance on safely inserting and removing memory cards.
Provides configuration steps for the X-Lite softphone.
Details configuration settings for SNOM IP phones.
Outlines configuration for the Linksys PAP2 ATA device.
To Next Page
General