EasyManua.ls Logo

ALLO NANO PBX - 1.2 NanoPBX Technical Specifications

ALLO NANO PBX
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COPYR IG H T
200 9-2010
ALL O.CO M
-
VISIT
US
ONLIN E
AT
W W W. ALLO.C O M
5
1.2 NanoPBX Technical Specifications
PBX Features: Codec: G.711 A-law & µ-law, G.723, G.729
Call Forwarding
Holding and retrieval Fax: T.38, Pass-through
Call Transfer - Attended and Blind
3-way Conference DTMF: RFC 2833, In-band, SIP Info
Call Parking, Pickup and Retrieval
Remote Voice mail Access System Capacity & Expandability:
Recordable IVR Prompts Supports up to 50 IP Extensions
Multilevel auto attendant with IVR 8 TDM concurrent calls (6 G729)
Intercom 20 IP concurrent calls
Configurable Call Routing
- Least Cost Routing
- Call Route to Multiple Extensions or Targeted User
- Call Hunting - Sequential, Round Robin, Random
TDM + IP scenarios:
8 TDM + 3 IP
4 TDM + 8 IP
0 TDM + 20 IP
Multiple Music on Hold Stacking: Double the capacity of NanoPBX
Call Queue
Direct Inward Dial (DID) routing Internet:
Caller ID Spoofing DHCP server on the LAN side
Busy Lamp Field (BLF) DHCP client on the WAN side
Regional Caller ID & Country Settings STUN/NAT traversal (RFC 3489)
CDR(Caller ID, Time/Date Incoming, Outgoing,
Missed)
SIPv2 - Session Initiation Protocol Version
2 (RFC 3261, 3262, 3263, 3264)
Voice Features: Host Name Config
Echo cancellation (G.168)
System Management:
VAD with silence suppression WEB interface accessible from LAN & WAN
CNG Password control
Packet loss concealment Backup and Restore of configuration
Adaptive jitter buffer Software Upgrade
Signal discriminator Factory Reset
Attenuation/Gain adjustment Date & Time Configuration

Table of Contents