ALLO NANO PBX - Page 24

COPYR IG H T 200 9-2010 ALL O.CO M - VISIT US ONLIN E AT W W W. ALLO.C O M 24
Adding a New VoIP Account Details
1. Account Name: SIP service subscriber name which will be used for Caller ID display.
2. Username: User account information, provided by VoIP service provider (ITSP), usually has the
form of digit similar to phone number or actually a phone number.
3. Password: Set a password to register to (SIP) servers provided by the ITSP.
4. Authorization UserID: Same as username.
5. Caller ID: Caller id given here will be displayed to the other end for outgoing call using this VoIP
trunk
6. Proxy IP Address: IP address or Domain name provided by VoIP service provider.
7. Proxy Port (Default: 5060): Used to set the Proxy Port numbers. By default port number will be 5060.
8. Domain/Realm: Domain name provided by VoIP service provider.
9. Registration Time-out: This option enables SIP sessions to be periodically "refreshed" via a re-invite
request. Once the session interval expires, if there is no refresh via a re-
invite message, the session will be terminated.
10. DTMF Mode: This parameter sets the payload type for DTMF using RFC2833
11. NAT: It should be check if the device is behind a NAT router.