2.0 Installation, continued
2.1 Installation Procedure
The XM2-300HP can be shelf-mounted in a variety of Alpha enclosures. Complete the pre-
installation instructions in Section 2.0, and the preliminary inspection and self-test procedure,
Alpha enclosures are engineered to properly vent the XM2-300HP. The XM2-300HP series has been
investigated by regulatory authorities for use in various Alpha enclosures. If you are using a non-Alpha
NOTE:
The battery is an important part of the XM2-300HP. Properly install and test all batteries, battery
1.
Connect battery cables to battery input connector.2.
Insert temperature probe cable3.
4.
5.
6.
7.
8.
9.
to the utility outlet.
10.
11.
Perform self-test. If the unit is operating from batteries, the self-test must be 12.
key. Wait for Self-test completion before proceeding.
Perform this live inverter test procedure:13.
14.
22
017-877-B1-001 Rev. A
To Next Page
Loading...
