5.
6.
to reset all parameters to their factory default values.
In addition to using UP and DOWN to increase or decrease numerical values, you
Menu, press ESCAPE three times.
4.0 Operation, continued
4.3 Smart Display modes for XM2-300HP, continued
4.3.3 Setup Menu
PIM. Setup Menu navigation is similar to the Operation Normal menu. Press UP
selected.
To select and change a value in the Setup Menu:
Press either UP or DOWN to put the display in the Manual Scroll mode.1.
Continue to press UP or DOWN until the desired item is displayed.2.
Press ENTER to select the item for editing. 3.
Use UP to increase the displayed value, or DOWN to decrease the value. To 4.
change the displayed value more rapidly, press and hold either UP or DOWN for
NOTE:
manually reset these settings.
NOTE:
39
017-877-B1-001 Rev. A
To Next Page
