5.0 XM2-300HP Maintenance, continued
5.7 Inverter Module Maintenance
Carefully remove the inverter module assembly (see Section 2.3, Inverter Module 1.
Inspect the inverter module for signs of dust or corrosion. 2.
Inspect ventilation holes to verify they are clear of obstruction from debris or other 3.
standby operation.
Observe the battery voltage reported on the Smart Display. If battery voltage drops
and time to the event counter.
a Service PS
or the load is at a critical stage.
56
017-877-B1-001 Rev. A
To Next Page
Loading...
