Safety Precautions, continued
enclosure.
codes for proper disposition of batteries
The XM2-300HP has been investigated by regulatory authorities for use in various Alpha enclosures. If
you are using a non-Alpha enclosure, it is your responsibility to ensure your combination conforms to your
Battery Safety Notes
charge voltages. Failure to do so can damage the batteries.
verify the correct charger voltage settings.
Check battery voltages UNDER LOAD. Use a load tester if available.
operation manual for corresponding charger settings.
Establish and maintain a battery maintenance log.
in inverter mode.
NOTE:
8
017-877-B1-001 Rev. A
To Next Page
Loading...
