MTX-30F Push Installation & Operation Guide Page 13
Enrolling Users
Three Ways to Enroll
After installing the MTX-30F Push Fingerprint terminal and powering
on, you may begin enrolling users. If this is the first enrollment in a
new or empty clock system, everyone will be able to enroll.
However, if there are any users with privileges already setup in the
system, you will have to be enrolled by a user with privileges. The
MTX-30F Push Fingerprint reader provides the following three
methods for enrollment:
• Fingerprint
• Password
• Proximity Card
Note: Use care when enrolling users at the terminal as the ESC
button can alter the entry functions during some operations.
There are three types of users:
• Normal User
• Registrar
• Super Admin
To Next Page
Loading...
