MTX-30F Push Introduction
The MTX-30F Push is a sophisticated data collection terminal for use directly with Amano Time
Guardian to provide a complete PC or cloud based time and attendance solution for small
business.
The MTX-30F Push terminal with Amano Time Guardian provides a system that automatically
calculates and accumulates hours worked based on the company's payroll policies. This
system separates the hours worked into regular and overtime pay categories and displays
them at the terminal (if enabled).
When using the fingerprint terminal, a user must enroll their fingerprint in the fingerprint
template database. The MTX-30F Push Fingerprint terminal will record the user’s fingerprint
template, encrypt it, and store the data. When a user presents their finger for verification, a
new template is captured and compared to the pre-enrolled fingerprint in the database. If there
is a match, the user will be accepted by the MTX-30F Push Fingerprint terminal.
The MTX-30F Push Fingerprint terminal also provides re-punch protection at the terminal when
the "Recheck Min” feature is set. Multiple punches within the setting time frame will be verified
but not recorded at the terminal in flash memory.
Note: Additional module may be required.
Your MTX-30F Push terminal package should include the following:
• Fingerprint Data Collection Terminal
• 100-240 V AC Power Adapter
• 6 foot Cat 5 cable
• Mounting Bracket
• Plate and hardware
• One Prox ID card
What’s In the Box
MTX-30F Push Installation & Operation Guide Page 5
To Next Page
Loading...
