Amazone Cenius 3003 - Page 53

Commissioning
6.1.1.2 Calculation of the required minimum front ballast G
V min
of the tractor to ensure safe
steering
b
a
bTb
Td
c
G
G
LVH
V
+
••+
•−
+
•
=
2,
0)
(
min
Enter the numeric value for the calculated minimum ballast G
V min
,
required on the front side of the tractor, in the table (section 6.1.1.7).
6.1.1.3 Calculation of the actual tractor front axle load T
V act
b
d
c
Gb
TbaG
T
H
V
V
tat
V
)(
)
( +•
−•
+
+•
=
Enter the numeric value for the calculated actual front axle load and
the approved tractor front axle load specified in the tractor operating
manual in the table (section 6.1.1.7).
6.1.1.4 Calculation of the actual total weight of the tractor/ implement combination
HLVtat
GTGG ++=
Enter the numeric value for the calculated actual total weight and the
approved total tractor weight specified in the tractor operating manual
in the table (section 6.1.1.7).
6.1.1.5 Calculation of the actual tractor rear axle load T
H act
tatV
tat
tat
H
TGT −=
Enter the numeric value for the calculated actual rear axle load and
the approved tractor rear axle load specified in the tractor operating
manual in the table (section 6.1.1.7).
6.1.1.6 Tyre carrying capacity
Enter the double value (two tyres) of the approved load capacity (see,
for example, tyre manufacturer's documentation) in the table (section
6.1.1.7).
Cenius 03 BAG0144.5 10.19
53