Amazone Cirrus 03 - Residual Emptying of the Filling Auger

Use of the implement
Cirrus 03 BAH0101-05 11.19
261
14. Switch off the filling auger and move the
valve lever to lever position 1.
15. Empty the filling auger of residual contents,
see section "Residual emptying of the filling
auger", page 269.
16. Close the cover tarpaulin of the filling fun-
nel.
17. Move the filling auger into transport posi-
tion, see section "Moving the filling auger in-
to transport position", page 269.
Fig. 379
Do not uncouple the tractor when in filling position.
10.4.3.2 Residual emptying of the filling auger
1. Move the filling auger into the filling posi-
tion.
2. Switch off the tractor PTO shaft, apply the
tractor parking brake, switch the tractor
engine off and remove the ignition spanner.
3. Loosen the 2 hexagon nuts (Fig. 380/1) and
do not remove them.
4. Move the emptying flap in the slotted holes
and fold open.
Fig. 380