Coupling and uncoupling the implement
152
Cirrus 03 BAH0101-05 11.19
7 Coupling and uncoupling the implement
When coupling and uncoupling implements, follow the instructions
given in the section "Safety instructions for the operator".
CAUTION
Before adjustment, maintenance and repair work
ï‚· lower the implement onto level solid ground
ï‚· apply the tractor parking brake
ï‚· switch off the control terminal
ï‚· switch off the tractor engine
ï‚· remove the ignition spanner
ï‚· disconnect the power supply between the tractor and the imple-
ment. Disconnect the implement plug (e.g. ISOBUS plug).
Risk of accident due to unintentional activation of the metering
unit or other implement components caused by radar pulses.
WARNING
Risk of crushing due to unintentional starting and rolling away
of the tractor and implement when coupling or uncoupling the
implement!
When coupling or uncoupling the implement, secure the tractor and
implement against unintentional starting and rolling away before
entering the danger area between the tractor and implement.
WARNING
Risk of crushing between the rear of the tractor and the imple-
ment when coupling and uncoupling the implement!
Actuate the operating controls for the tractor's three-point hydraulic
system
ï‚· from the workplace provided
ï‚· if you are outside of the danger area between the tractor and the
implement.