Faults
Cirrus 03 BAH0101-05 11.19
277
11 Faults
WARNING
Danger of crushing, shearing, cutting, being caught or drawn in,
winding and knocks through:
ï‚· unintentional lowering of the implement raised using the
tractor's three-point hydraulic system.
ï‚· unintentional lowering of raised, unsecured implement
parts.
ï‚· unintentional start-up and rolling away of the tractor-
implement combination.
Secure the tractor and the implement against unintentional starting
and rolling away before eliminating faults on the implement.
Wait for the implement to stop, before entering the implement danger
area.
CAUTION
Before adjustment, maintenance and repair work
ï‚· lower the implement onto level solid ground
ï‚· apply the tractor parking brake
ï‚· switch off the control terminal
ï‚· switch off the tractor engine
ï‚· remove the ignition spanner
ï‚· disconnect the power supply between the tractor and the imple-
ment. Disconnect the implement plug (e.g. ISOBUS plug).
Risk of accident due to unintentional activation of the metering
unit or other implement components caused by wheel move-
ments or radar pulses.
11.1 Residual seed volume indicator
A visual and acoustic warning is given when the residual quantity in the hopper is undercut (when the
fill level sensor is correctly set).
The residual quantity should be large enough to prevent fluctuations in the spread rate.