16
Safety
DB 534 02. 02
2.6 General safety and accident
prevention advice for maint-
enance, repair and cleaning
1. Repair-, maintenance- and cleaning operations
as well as the remedy of function faults should
principally be conducted with drive and engine
stopped. Remove ignition key.
2. Check nuts and bolts for tightness regularly. For
the first time after 3 – 4 hopper fillings. If
necessary retighten nuts and bolts.
3. When doing maintenance work on the lifted
implement make sure that it is secured by
proper supports.
4. Dispose of oil, grese and filters in the
appropriate manner.
5. Before doing any repair work on the electric
disconnect power supply.
6. Before conducting electric welding operations on
vehicle or on the mounted implement, remove
cable from generator and battery.
7. Any spare parts fitted must, as a minimum meet
with the implement manufacturers' fixed
technical standards. Using original AMAZONE
spare parts for example ensures this. Non
original parts invalidate warranty and contravene
these documentation for safe use.
To Next Page
Loading...
