Amazone E+S - Machine Overview and Specifications; Intended Use of the Spreader; Manufacturer, Compliance, and Service; Machine Identification Plate

Details about the machine
5
DB 534 02. 02
1. Details about the machine
1.1 Range of application
The spreader for winter application AMAZONE E + S
is suited for spreading grit, sand, salt and mixtures.
1.2 Manufacturer
AMAZONEN-WERKE
H. DREYER GmbH & Co. KG
P. O. Box 51, D-49202 Hasbergen-Gaste/Germany
1.3 Conformity declaration
The machine fulfils the requirements of the EC-guide
line Machine 89/392/EC and the corresponding
additional guide lines.
1.4 On requesting after sales service
and parts
When ordering options or spare parts, the machine
model and the serial number have to be quoted.
F
The safety technical requirements are
only fulfilled if, in case of repair
AMAZONE original spare parts are used.
Using non-original spare parts will rule
out the liability of AMAZONE for
resulting damage.
1.5 Type plate
Type plate on the machine.
D
4
9
2
0
5
H
a
s
b
e
r
g
e
n
-
z
u
l
.
N
u
t
z
l
.
:
Ty
p
:
M
a
s
c
h
.
N
r
.
:
F
The entire type plate is of documentary
value and should not be damaged or
removed.