Amazone E+S - Receiving and Inspecting the Spreader; Initial Inspection and Functional Check

On receipt of the machine
19
DB 534 02. 02
4. On receipt of the machine
The spreader (1) is supplied with PTO shaft (2).
Check that no damage has been caused in transit
and all parts are present according to the delivery
note.
4.1 Function control
Carry out a function control after receipt of the
machine (1).
For checking the function turn the machine (1) by
hand one time on the gearbox input shaft.
Check lubrication of the PTO shaft (2) and the oil
level in the gearbox (please refer to chapter 6.3.3).
D
4
9
2
0
5
H
a
s
b
e
rg
e
n
-
zul.Nutzl.:
Typ:
M
a
s
c
h
.
N
r
.
: