8
Safety
DB 534 02. 02
2. Safety
This instruction manual contains basic advice, which
has to be observed when mounting, operating and
maintaining the machine. Thus, this instruction
manual has implicitly to be read by the operator
before starting to operate and this book must be
made available to him.
All safety advice in this instruction manual must be
strictly observed and adhered to.
2.1 Danger when not adhering to the
safety advice
Not adhering to the safety advice
• may result in endangering persons, also the
environment and also the machine itself.
• may result in the rejection of any claim for
damage.
Not paying attention to the safety advice may cause
the following risks:
• Danger to persons not excluded from operational
areas.
• Failure of important functions within the machine.
• Failure of carrying out prescribed measures of
maintenance and repair.
• Danger to persons through physical or chemical
contact.
• Danger to persons, or the environment by leaking
hydraulic oil.
2.2 Qualification of operator
The implement may only be operated, maintained
and repaired by persons, who are acquainted with it
and have been informed of the relevant dangers.
2.3 Identification of advice in this
instruction manual
2.3.1 General danger symbol
The safety advice in this operators manual, which
may lead to a danger to persons if not being
observed, are identified with the general danger
symbol (Danger symbol according to DIN 4844-W9)
a
2.3.2 Attention symbol
Attention symbols which may cause dangers to the
machine and it’s function when not being adhered to,
are identified with the attention symbol.
I
2.3.3 Hint symbol
This symbol marks machine’s specific points that
should be observed to ensure the correct spreading
operation.
F
.
To Next Page
Loading...
