Amazone E+S - Hydraulic Mounting and Spreader Dismounting; Hydraulic Motor Connection; Dismounting the Spreader

Mounting and dismounting
25
DB 534 02. 02
5.1.2 E+S with hydraulic motor
a
The hydraulic system is under high
pressure.
Connect hydraulic hoses to the
hydraulic rams and motors according to
the advice in the instructions.
When fitting the hydraulic hoses to the
vehicle hydraulic sockets always ensure
that the hydraulic system on the vehicle
as well as on the implement is without
pressure.
- Connect the oil return flow hose with a pressure
free oil return flow.
F
The oil return flow hose is provided with
a silver galvanised plug, soft pressure
spring on the plug and a return valve.
- Connect the flow hose with a single acting spool
valve.
F
The "flow hose" is provided with a
yellow galvanised plug and hard
pressure spring on the plug.
F
The spreading disc rotates in clockwise
direction.
I
In case of a wrong direction of rotation
re-bolt or exchange the hoses
on the motor,
on the towing vehicle or
on both of them.
5.2 Dismounting
- For dismounting place the spreader with empty
hopper on a level ground so that there is no need
to lift the machine at the front (danger of tipping
over).
- Dismount the spreader from the towing vehicle.
- (E+S) Fix PTO shaft with the upper link pin in the
upper link shackle.
- (E+SH) Place couplings for the hydraulic hoses in
the provided retainers.