Mounting and dismounting
23
DB 534 02. 02
5. Mounting and dismounting
a
Danger of tipping over.
For mounting and dismounting place the
spreader on level ground. Don’t lift at the
front.
a
Danger of tipping over!
Mount and dismount the spreader only
with an empty hopper.
a
Any operation on the spreader should
only be carried out with switched off
motor and pressure-free hydraulic
system.
a
Remove ignition key. Secure the vehicle
against unintended starting and rolling
away.
a
Danger of tipping over
Advise people to leave the danger area
behind and underneath the machine.
a
Danger of tipping over
When linking up observe sufficient
space for movement of the lower links.
a
Danger of tipping over.
Lift machine only with attached upper
link.
a
The speed of lowering the filled spreader
must never be faster than 2 seconds. If
available set the throttle valve
accordingly.
I
Ensure a horizontal and lateral stable
mounting cross ways to the driving
direction to prevent the machine from
swinging to and fro during spreading
operation.