Amazone FTender 1600 - Preparing the implement for transport; Loading the implement with a crane

4. Remove the bolt
1
.
5. Remove the bolt
3
.
6. To tension the roller chain
4
,
turn the drive motor
2
.
In a tensioned state, the roller chain still needs
slight height play.
7. Tighten the bolts on the drive motor.
1
2
3
4
CMS-I-00003858
8. Install the cover
3
.
9. Install the upper bolts
1
.
10. Install the lower bolt
2
.
2
1
3
2
3Nm
CMS-I-00003891
10 | Repairing the machine
Maintaining the machine
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
118