Amazone FTender 1600 - Parking the machine; Emptying the hopper; Emptying the hopper via the quick emptying; Emptying the hopper via the metering unit

6.4 Preparing the machine for road travel
6.4.1 Move the T-Pack F into parking position
1. Raise the implement.
2. Remove the linch pin
1
.
3. Open the locking mechanism
2
.
CMS-I-00002478
4. To move the T-Pack F
1
into parking position,
lower the implement.
The swing arm is resting on the front stop
2
.
The pegging holes for working position
3
are
exposed.
CMS-I-00002479
CMS-T-00003203-H.1
CMS-T-00003134-C.1
6 | Preparing the machine
Preparing the machine for road travel
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
85