Amazone FTender 1600 - Index

14.2 Index
3
3-point mounting frame
coupling 52
uncoupling 100
A
Address
Technical editing 4
adjusting
Metering volume 63
Adjusting the fan speed 71
Adjusting the low level sensor 74
Aids 30
B
Ballast weights 36
Bolt tightening torques 127
C
Calibration
Metering unit 67
Spread rate 67
Camera
Certified camera system 38
Connecting the camera system 52
non-certified camera system 37
Chain oil 43
Changing the implement controls
Autonomous ISOBUS 72
Integrated ISOBUS 73
Changing the metering roller 64
checking
Hydraulic hose lines 105
Lower link pin 104
Tightening torque for radar sensor bolts 113
Top link pin 104
cleaning
Implement 123
Cleaning the fan rotor 105
Contact data
Technical editing 4
Conveyor line
uncoupling 102
Cross-traffic
monitoring 86
Cyclone separator
cleaning 107
Description 32
D
Description of the warning symbols 25
Digital operating manual 4
Dimensions 40
Disconnect the
coupling 47
Documents 30
Drivable slope inclination 43
E
Electric supply lines
coupling 49
Eliminating faults 90
Emptying the hopper
via the metering unit 91
via the quick emptying 91
F
Fan
Description 31
Fan guard screen 22
Filling auger
emptying 97
Front axle load
calculation 44
Front ballasting
calculation 44
Function of the implement 20
14 | Directories
Index
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
130