The non-certified camera system consists of one or
several cameras on the implement.
The cameras serve to observe the surroundings and
as a manoeuvring aid. It is used for cross-traffic
monitoring with front-mounted implements.
4.17 Certified camera system
The certified camera system is used for cross-traffic
monitoring. It does not replace the requirements for
the field of vision.
The certified camera system can replace a banksman
at intersections and junctions.
The certified camera system includes one camera on
the left and right side of the implement respectively.
The position and orientation of the cameras may not
be changed.
4.18 Radar sensor
On electric drives, the radar sensor records the
working speed. The working speed is used to
determine the worked area and the required speed
for the metering drives.
CMS-I-00002221
4.19
Power supply
Depending on the implement equipment, not all of the
electrical supply lines are available.
CMS-T-00011762-B.1
CMS-T-00001778-C.1
CMS-T-00001852-C.1
4 | Product description
Certified camera system
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
38
To Next Page