Amazone FTender 1600 - Emptying the filling auger

Parking the machine
9
9.1 Emptying the hopper
9.1.1 Emptying the hopper via the quick emptying
1. Switch off the fan.
2. Loosen the knurled screw
2
.
3. Open the quick emptying with the lever
1
.
The flap will be opened
3
.
4. Collect the residual quantity in a collection bucket.
5. When the hopper is empty,
Close the quick emptying.
6. Tighten the knurled screw.
1
2
3
CMS-I-00009313
9.1.2 Emptying the hopper via the metering unit
1. If the implement is equipped with a double
sluice,
activate the conveyor section
2
with the lever
1
.
2
1
Cal
ME1080
CMS-I-00002542
CMS-T-00003113-I.1
CMS-T-00003324-E.1
CMS-T-00003133-E.1
CMS-T-00003325-C.1
9 | Parking the machine
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
91