Amazone FTender 1600 - Using the loading board; Using the filling auger to fill the hopper

14. Lock the locking lever
1
on the hopper cover.
CMS-I-00002483
6.3.4 Using the loading board
1. Lower the implement.
2. Unlock the locking pins
2
on the loading board.
3. Swivel the loading board
1
down
or
Swivel up the loading board.
4. Secure the loading board in the desired position
with the locking pin.
CMS-I-00002563
6.3.5 Using the filling auger to fill the hopper
1. Swivel the loading board down.
2. Open the hopper cover.
3. Lower the implement.
4. Open the locking mechanism
1
.
5. Remove the cover
2
.
CMS-I-00003856
CMS-T-00003199-F.1
CMS-T-00005415-G.1
6 | Preparing the machine
Preparing the implement for operation
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
57