Amazone FTender 1600 - Preparing the machine for road travel; Move the T-Pack F into parking position

24. To mount the transport lock on the FTender:
Install the operating handle
1
.
25. Install the bolts
3
.
26. Install the nuts and washers
2
.
1
2
3
CMS-I-00003638
27. Install the bolts
1
.
28. Install the locking plate
2
.
29. Install the nuts and washers
3
.
3
2 1
CMS-I-00003639
30. Install the linch pin
1
.
1
CMS-I-00003640
6.3.15 Dismounting the T-Pack F
NOTE
Road travel with the dismounted T-Pack F is
only permitted with lighting and identification in
compliance with the national regulations.
CMS-T-00003332-E.1
6 | Preparing the machine
Preparing the implement for operation
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
79