Amazone FTender 1600 - Using the parking supports

17. To mount the T-Pack F on the FTender:
Install the clamps
1
.
18. Install the 8 bolts
2
.
2
1
CMS-I-00002520
19. Install the nuts and washers
1
and tighten them.
20. Install the nuts and washers
2
and tighten them.
12
1
174 Nm
174Nm
CMS-I-00003644
21. To mount the working position sensor on the
T-Pack F:
Install the working position sensor
1
on the
desired top link mounting
3
or
4
.
22. Install the nuts and washers
2
.
23. To adjust the working position sensor to the top
link:
See section "Adjusting the working position
sensor".
1
4
3
2
CMS-I-00003637
6 | Preparing the machine
Preparing the implement for operation
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
78