Need help?Do you have a question about the Amazone FTender 1600 and is the answer not in the manual?
General| Brand | Amazone |
|---|---|
| Model | FTender 1600 |
| Category | Farm Equipment |
| Language | English |
Details copyright information for the manual.
Explains symbols and conventions used in diagrams.
Defines DANGER, WARNING, and CAUTION signal words.
Explains IMPORTANT, NOTE, and ENVIRONMENTAL INFORMATION symbols.
Explains numbered and sequential instructions.
Explains how alternative steps are presented.
Describes instructions presented with arrows.
Describes instructions presented as a list.
Identifies maintenance work requiring specialist personnel.
Explains how lists without essential order are shown.
Explains how item numbers in figures are indicated.
Specifies how directions are indicated.
Refers to other relevant documents in the Appendix.
Information on downloading the digital manual and e-learning.
Feedback request for manual improvement.
Covers fundamental safety guidelines for implement operation.
Emphasizes the importance of observing the manual.
Guidelines for safe operational procedures and organization.
Specifies requirements for personnel operating the implement.
Minimum physical and mental requirements for operators.
Defines qualification levels for machine operators.
Role and responsibilities of a farmer using the implement.
Role and responsibilities of agricultural helpers.
Safety precautions regarding passengers and workplaces.
Safety measures to protect children from hazards.
Ensuring the machine is in perfect technical condition.
Importance of machine preparation for safe operation.
Guidelines for selecting and using PPE.
Precautions regarding clothing to prevent entanglement.
Ensuring warning symbols are legible and present.
Identifying and mitigating potential machine hazards.
Specific hazards associated with machine operation.
Identifying hazardous zones on the machine.
Proper procedures for operating and handling the machine.
Safe practices for coupling implements to tractors.
Safety measures for driving with mounted or towed implements.
Guidelines for safe maintenance and authorized modifications.
Regulations for design changes and extensions.
Safety procedures for working on the machine.
Hazards associated with raised implement parts.
Safety precautions for welding on the implement.
Proper use of operating materials to prevent damage.
Using original or AMAZONE-approved parts.
Procedures to ensure safety during operation.
Ensuring protective equipment is correctly installed and functional.
Safe practices for mounting and dismounting the machine.
Overview of the implement's components.
Explanation of how the implement operates.
Details on optional or market-specific equipment.
Description of protective guards on the implement.
Protective screen for the metering unit.
Protective screen for the fan.
Overview of warning symbols on the machine.
Location of warning symbols on the implement.
Structure and meaning of warning symbols.
Detailed explanation of specific warning symbols.
Warning symbol for non-compliance with manual instructions.
Warning symbol for hydraulic fluid under high pressure.
Warning symbol for crushing between tractor and implement.
Warning symbol for improperly attached lifting gear.
Warning symbol for unintentional starting and rolling.
Warning symbol for transport security.
Warning symbol for danger in hand wash tank.
Warning symbol for high hydraulic system pressure.
Warning symbol for hand wash tank water hazard.
Warning symbol for chemical burns from dust.
Information on the implement's rating plate.
Contents of the threaded cartridge.
Details on implement lighting systems.
Regulations for road lighting and identification.
Description of the implement's work lights.
Description of hopper interior lighting.
Description and function of the conveyor fan.
Description of the cyclone separator.
Overview of the implement's metering system.
Description of conveyor sections.
Description of the 1-chamber closed hopper.
Description of the 1-chamber open hopper.
Description of the 2-chamber closed hopper.
Description of the metering unit.
Description of the metering roller.
Description of the one-sided switching function.
Description of the hose package.
Details on ballast weights for weight distribution.
Description of the storage bin.
Description of the T-Pack F attachment.
Description of the rolling and parking device.
Description of the non-certified camera system.
Description of the certified camera system.
Description of the radar sensor.
Description of the implement's power supply.
Information on the serial number location.
Technical dimensions of the implement.
Technical weight specifications of the implement.
Specification of the mounting category.
Calculation of permissible payload for operation.
Tables for working speed and spread rates.
Technical data regarding tractor performance.
Information on noise emission levels.
Maximum permissible slope inclinations for operation.
Recommended lubricants for the machine.
Specification for chain oil.
Calculations for determining tractor requirements.
Step-by-step guide for coupling the implement.
Safe procedure for approaching the implement.
Procedure for connecting the power supply.
Instructions for connecting the conveyor line.
Procedure for coupling the pressure gauge.
Procedure for connecting electric supply lines.
Instructions for connecting hydraulic hose lines.
Procedure for connecting the camera system.
Steps for coupling the 3-point mounting frame.
Procedure for removing the rolling and parking device.
Steps to prepare the implement for operation.
Procedure for adjusting the working position sensor.
Steps to move the T-Pack F into working position.
Instructions for using the hopper cover.
Instructions for using the loading board.
Procedure for filling the hopper using the filling auger.
Instructions for filling the hand wash tank.
Steps to prepare the metering unit for operation.
Procedure to put the metering unit into operation.
Guide for selecting the correct metering roller.
Instructions for converting modular metering rollers.
Procedure for enlarging metering chambers.
Instructions for adjusting the metering volume.
Procedure for changing the metering roller.
Instructions for adjusting the fan speed.
Procedure for setting up the speed sensor.
Instructions for changing implement controls.
Details on autonomous implement control setup.
Details on integrated implement control setup.
Procedure for adjusting the low level sensor.
Instructions for installing ballast weights.
Steps for mounting the T-Pack F.
Instructions for using the parking supports.
Procedures for preparing the machine for road travel.
Steps to move the T-Pack F into parking position.
Safety precautions for monitoring cross-traffic.
Instructions for switching off work lights.
General instructions for using the implement.
Operation of the hydraulically actuated sensor.
Procedure for turning on headlands.
Procedures for emptying the hopper.
Method for emptying hopper via quick emptying.
Method for emptying hopper via metering unit.
Procedures for emptying the metering unit.
Procedures for emptying the filling auger.
Instructions for installing the rolling and parking device.
Steps for uncoupling the 3-point mounting frame.
Safe procedure for driving tractor away from implement.
Procedure for disconnecting hydraulic hose lines.
Procedure for uncoupling the power supply.
Procedure for uncoupling the pressure gauge.
Procedure for uncoupling the conveyor line.
Procedures for maintaining the machine.
Schedule for regular machine maintenance.
Procedure for checking lower and top link pins.
Procedure for checking hydraulic hose lines.
Procedure for cleaning the conveyor section.
Procedure for cleaning the suction guard screen.
Procedure for cleaning the cyclone separator.
Procedure for cleaning the hopper.
Procedure for cleaning the metering unit.
Procedure for cleaning the hand wash tank.
Procedure for checking radar sensor bolt torque.
Procedure for checking wheel bolt torque.
Procedure for checking frame connection torque.
Procedure for checking tyre inflation pressure.
Procedure for adjusting the T-Pack F scraper.
Procedure for checking the roller chain.
Procedure for tensioning the roller chain.
General guidelines for lubricating the machine.
Visual guide to lubrication points on the machine.
Procedure for lubricating the filling auger roller chain.
Guidelines for cleaning the implement with high-pressure water.
Instructions for loading the implement using a crane.
Procedure for securely lashing the implement for transport.
Table of bolt tightening torques based on size and class.
List of other relevant operating manuals.
Definitions of key terms used in the manual.
Alphabetical index for quick reference.
Alphabetical index for quick reference.
Alphabetical index for quick reference.
Alphabetical index for quick reference.
Alphabetical index for quick reference.
Alphabetical index for quick reference.
Alphabetical index for quick reference.
Alphabetical index for quick reference.
Alphabetical index for quick reference.
Alphabetical index for quick reference.
To Next Page