Amazone FTender 1600 - Adjusting the fan speed

7. Loosen the bolts
1
with the wrench
3
.
8. Swivel the bolts to the side.
9. Take the sliding shutter
2
from its parking
position.
2
3
1
CMS-I-00002503
10. Push the sliding shutter
1
into the metering
housing.
11. Park the wrench in the holder
2
.
12. To empty the metering unit and the metering
roller,
refer to the ISOBUS software operating manual,
"Emptying".
1
2
CMS-I-00003650
13. Loosen the bolts with the wrench
1
.
14. Park the wrench in the holder
3
.
15. Turn the bearing cover
2
.
1
3
2
CMS-I-00002501
6 | Preparing the machine
Preparing the implement for operation
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
65