Amazone FTender 1600 - Alternative instructions; Instructions with only one action; Instructions without sequence; Workshop work

1.2.3.3 Alternative instructions
Alternative instructions are introduced with the word
"or".
Example:
1. Instruction 1
or
Alternative instruction
2. Instruction 2
1.2.3.4 Instructions with only one action
Instructions with only one action are not numbered,
but rather shown with a arrow.
Example:
Instruction
1.2.3.5 Instructions without sequence
Instructions that do not require a specific sequence
are shown as a list with arrows.
Example:
Instruction
Instruction
Instruction
1.2.3.6 Workshop work
WORKSHOP WORK
Identifies maintenance work that must be
performed at a workshop that is adequately
equipped in terms of agricultural technology,
safety and environmental technology by
specialist personnel with appropriate training.
CMS-T-00000110-B.1
CMS-T-005211-C.1
CMS-T-005214-C.1
CMS-T-00013932-B.1
1 | About this operating manual
Diagrams
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
3