Amazone FTender 1600 - Page 98

2. Unlock the locking lever
1
on the metering
housing.
3. Open the calibration flap
2
.
1
2
CMS-I-00003654
4. If only small residual quantities need to be
collected,
push the calibration bucket
1
into the holder
2
under the metering housing
or
If larger residual quantities need to be collected,
put a larger collection bucket under the metering
housing.
1
2
CMS-I-00003653
5. Loosen the bolts
1
with the wrench
3
.
6. Swivel the bolts to the side.
7. Take the sliding shutter
2
from its parking
position.
2
3
1
CMS-I-00002503
9 | Parking the machine
Emptying the hopper
MG6492-EN-II | P.1 | 21.11.2023 | © AMAZONE
92