UX01 Super CP Plus BAG0157.3 03.18
WARNING
Danger of crushing, shearing, cutting, being caught or drawn in,
winding and knocks through:
unintentional lowering of raised, unsecured implement
parts.
unintentional start-up and rolling of the tractor-implement
combination.
Secure the tractor and the machine against unintentional start-up and
rolling before eliminating faults on the machine. See page 140.
Wait for the implement to stop, before entering the implement danger
area.
WARNING
There can be danger for the operator / third persons caused by
flying damaged parts due to unauthorised high drive speeds of
the tractor PTO shaft!
Observe the permissible implement drive speed before switching on
the tractor PTO shaft.
WARNING
Danger of being entangled and drawn in and danger from foreign
objects being caught and thrown in the danger area of the driven
PTO shaft!
• Whenever the machine is used, first check to ensure that the
safety devices and guards of the PTO shaft are fully intact and
functional.
Have damaged safety and protective devices for the universal
joint shaft immediately replaced by a specialist workshop.
• Check that the universal joint shaft guard is secured against
rotation by the supporting chain.
• Maintain a sufficient safety clearance between you and the driv-
en universal joint shaft.
• Direct people out of the danger area of the driven universal joint
shaft.
• Shut down the tractor engine immediately in case of danger.
To Next Page
Loading...
Need help?
General
