Driving with reduced inflation pressure
• The inflation pressure specified in the table is required to
achieve the permissible tyre load capacity!
• With a lower inflation pressure, the tyre load capacity reduces
according to the following table!
In that case, observe the reduced payload of the implement.
• Please also follow the specifications of the tyre manufacturer!
Maximum tyre load capacity
100% 93% 86% 79%
Tyre inflation pressure
1,6 bar
(Nominal air
pressure)
1.4 bar 1.2 bar 1.0 bar
WARNING
Danger of accident!
In event of too low inflation pressure, the stability of the vehicle
is no longer guaranteed.
4.13 Noise production data
74 dB(A), measured in operating condition at the ear of the tractor
driver with the cab closed.
Measuring unit: OPTAC SLM 5.
The noise level is primarily dependent on the vehicle used.