FRESH WATER SYSTEM
To
sanitize/winterize:
NOTE: To winterize,
perform
steps 1-7, 13-16,
19,21,
& 22 only.
,"
.
--
1.
Prepare the required solution (either
th~
chlorine solution
or an antifreeze product) and have
its
tanding by at the
water utility compartment.
2. Close all drain valves alld faucets.
3.
ConneCt a length
of
garden-type hose
to
the
WINTERIZE water inlet in the utility compartment Put
,-
.......
the other end
of
the hose into the container
of
solution.
4.
TumVALVE 1 and VALVE 2 handles vertical.
5. Be sure
12~volt
DC power
is
available, and tum the water
pump
ON. The pump will draw the
sol1.ltion
and pump it
into the water
tank
Pump all the. solution into the tanlc
To Water Heater/Bypass /
To
Water Tank
Sanitizing/Winterizing - Part 1
Winterize
Inlet .
. City Water
,Inlet
. Getting the Solution into the Water Tank
© 1996 Fleetwood Enterprises Inc.
American
Eagl~
Wide
Body
ISSUE DATE: 6/96
,
"
"II
'€:I
All rights reserved
24
Page
50f
10
To Next Page
Loading...