American Eagle 1997 - San-T-Flush System Operation

L.
46
WASTE WATER SYSTEM
Page 3 of 5
SAN-T-FLUSH OPERATION
(using sanitizing bottle from kit)
1. Dump holding tanks in the usual manner at an approved station.
2.Leavedump valves open.
3. Attach garden hose to
San-T-Flush attachme~t.
4. Remove clear plastic bottle.
5.
Place one (1) waste liquefier tablet into screen.
,
6. Replace the bottle. Hand tighten .
. 7. Hook water hose to inlet side of the sanitizing bottle cover.
8. Connect the male disc.onnect to the San-T-Flush valve (yellow
hal1dle).
Tlil;n the valve to "BLACK TANK." ..
/
9. Flush black tank until tablet is 2/3 dissolved.
. "
10. While water is running, tum the San-T-Flush valve to "GREY
WATER TANK" and flush until the tablet is dissolved.
11. Tum San-T-Fhish valve to "BLACK TANK."
. ·12. Remove San-T-Flush attachment and garden hose.
13. Remove the sewer hose and cap the outlet.
14. Rinse out the sewer hose with fresh water and remove the sewer
-hosefrom the dump station.
Replace sewer or dump station covers.
© 1996 Fleetwood Enterprises Inc.
American lEagie
Wide Body
ISSUE DATE: 6/96
All rights"reSeNed