19
ENTRY STEP
Page 1 of 2
The entry step
is
controlled by the ignition switch and by a switch located
--
at the eritry door. Power for the entry step is supplied by
the
house battery
system. The house battery disconnect must be
ON for the step
to
operate as
describe~
below. The switches operate the step according to the following
table. -
WARNiNG
The distance between
the
motor
home and
the
ground
is
too
far
to
easily manage. Be
sure
the
step
-
is
out
before exiting
the
motor
home.
IGNITION
SWITCH
POSITION
OFF
. OFF
ON
ON
STEP
SWITCH
POSITION
ON
OFF
ON
OFF
STEP
POSITION/ACTION
Step extends and retracts with
the opening and closing
of
the
door. Light under
step' will be on.
Step is inactive. Will not move
regardless
of
doormovement.
Light under step will
be
off. _
Step extends and retracts with
opening and closing
.of door.
Light-under step will be on.
Step extends
and
retracts with
opening and closing
of
door.
Light under step will
be
off.
NOTE: This motor
home.is
equipped with a ,"Last Out
Feature" on the entry step. It automatically extends the step
if: the ignition switch is TURNED
OFF,
the
step position
switch is
OFF, and the entrydoor is OPENED. It will remain
extended until door is closed and either the ignition
or
step
position. switch is turned
on.
©
1996
Fleetwood Enterprises
1nc.
American Eagle
Wide80dy
ISSUE DATE: 6/96
All
rights
reserved
To Next Page
Loading...