28
Page 4
of6
INTERIOR AND FURNISHINGS'
SOFA/LOUNGE CONVERSION
T~
convert a sof3JIounge
int~
a bed:
Remove sofa bolsters.
Liftfront
of
sofa frame up and out.
Push the back
of
the
lounge back and down.
Push
theseat
belts
throughthe.spacebetween
the
lounge
back
ane!
seat. -
_.-
TOTestore the sofallounge:
Pull
the/seat
Qelts
back up through the space between the
lounge back and
seat.
Liftth'e
front edge
of
the sofa frame up, and pushit back. The
sofa back will come up. Push the sofa into position.
FOLDING. DOORS/PRIVACY CURTAIN DIVIDERS
The dividers allow you to' separate areas in the motor home. They glide on
nylon rollers and do not require lubrication. They are held closed by a catch.
When the dividers
are open for traveling, be sure to attach the catch to keep
them from sliding back
and
forth.
INTERIOR LIGHTING
Both
decorative and "utility" style 12-volt lighting fixtures may be used in
your
motor home
..
For your convenience, some lights are operated from wall switches. Clean
the lenses with soapy water.
©
1996-Fleetwood'EnterpriSes
Inc.
American Eagle
Wide
Body
ISSUE DATE: 6/96
AU
rights-reserved
To Next Page
Loading...